| ADSL CPE
USB Bus-Powered (UT-300U)
UTStarcom UT-300U UTStarcom’s UT-300U
is an external multi-mode ADSL modem. It connects to
a PC via USB interface
to deliver high-speed asymmetrical data transmission
service over an existing phone line, without interfering
with voice
transmission. Ideal for residential, LAN, and SOHO applications,
the UT-300U is simple to install, economically priced
and its bus-powered design eliminates the need for an
external
power supply.
The UT-300U supports both full-rate ADSL
(8 Mbps downstream / 1 Mbps upstream) and G.lite (1.5
Mbps downstream / 512
Kbps upstream). It interoperates with UTStarcom’s
IP DSLAM as well as other vendors’ standards-based
platforms supporting G.dmt Annex A (G.992.1), G.lite (G.922.2)
and T1.413 issue 2 (ADSL over POTS).
ADSL CPE- Not FCC Part 15 Class B, UL/CE Certified
ADSL 2/2+ Router/Bridge (UT-300R2)
UTStarcom's UT-300R2 enables routing and bridging functions
via a single DSL connection for high quality triple play applications.
Designed for residential, small-sized LAN and SOHO applications,
it supports higher ADSL/ADSL2+ speeds for triple play and high-end
video applications.
The UT-300R2 has built-in firewall capabilities and it supports
remote management via SNMPv1, v2c, and MIB II. It's bridging
functionality support transparent bridging and point-to-point
protocol.
ADSL CPE- Not FCC Part 15 Class B, UL/CE Certified
ADSL 2/2+ Router/Bridge (UT-300R2U)
UTStarcom's UT-300R2U enables routing and bridging functions
via a single DSL connection for high quality triple play applications.
Designed for residential, small-sized LAN and SOHO applications,
it supports higher ADSL/ADSL2+ speeds for triple play and high-end
video applications.
The UT-300R2U has one USB 1.1 port, built-in firewall capabilities
, it also supports remote management via SNMPv1, v2c, and MIB
II. It's bridging functionality support transparent bridging
and point-to-point protocol.
ADSL CPE - Not FCC Part 15 Class B, UL/CE Certified
ADSL 4 Ethernet port Router (UT-304R)
UTStarcom's UT-304R is a powerful Ethernet ADSL modem, which
can provide access to the Internet on broadband mode plus provides
network routing capabilities. It's Web based GUI makes it easy
to configure multiple functions. It also supports most popular
functions such as, DNS, NAPT, and DHCP server.
The UT-304R has built-in firewall capabilities and NAT ALG
supports for most famous gaming and VoIP applications.
ADSL CPE - Not FCC Part 15 Class B, UL/CE Certified
Multiport ADSL 2/2+ Router/Bridge (UT-304R2)
UTStarcom's UT-304R2 provides a high-speed single DSL connection
that can be shared by multiple users for high quality triple
play applications. In addition, a different variety of end-points
can be connected simultaneously. Designed for residential,
small-sized LAN and SOHO applications, it supports higher ADSL/ADSL2+
speeds for triple play and high-end video applications.
The UT-304R2 supports configuration and network management
via Telnet and Web Browser, and can be remotely managed via
SNMPv1, v2c, and MIB II. For additional security, it supports
VPN IPSec pass through, L2TP client/server and L2TP/PPTP pass
through, and ID password authentication.
Multimode ADSL Modem (UT-300RA)
UTStarcom
UT-300RA UTStarcom’s UT-300RA is an external
multi-mode ADSL modem that delivers high speed data over phone
lines, and provides routing, gateway and firewall capabilities.
Designed for residential, small LAN and SOHO applications,
the 300RA delivers both full-rate ADSL (8 Mbps downstream /
1 Mbps upstream) and G.lite (1.5 Mbps downstream / 512 Kbps
upstream).
The UT-300RA provides built-in firewall capabilities that
include stateful packet inspection, Denial-of-Service (DoS),
firewall trigger and URL-based content filtering. Additional
security features include VPN IPSec pass through, L2TP client/server
and L2TP/PPTP pass through, and ID password authentication.
Network-based configuration and management are enabled via
Telnet and Web browser. The device also supports remote management
via SNMP v1 and MIB II (RFC 1213).
|